Boutique
toutes catégories
Pacojet Spray guard Assembly Black
$100.00
In stock: 1 available
Product Details
UPC:
42273
Brand:
Pacojet
The Pacojet Spray Guard with preliminary scraper, protects the internal elements of your Pacojet from foodstuffs and dirt.
Spray guard with preliminary scraper included in standard delivery contents.
- Dos
- Always attach the pacotizing blade/spray guard assembly directly onto the splined, magnetic shaft.
- Listen for a “click” of the pacotizing blade/spray guard assembly snapping into position on the shaft.
- Always ensure there is a pacotizing blade attached to the magnetic end of the shaft before pacotizing a beaker with frozen contents.
- Don'ts
- Never put the pacotizing blade/spray guard assembly on the beaker before pacotizing.
- Do not start the machine if the pacotizing blade/spray guard assembly is not correctly attached to the shaft. You risk extensive damage to your machine.
- Explanation
- An insecurely attached blade will fall onto the contents surface and be “drilled” by the shaft, causing a loud noise. Immediately press the STOP button, before automatic shut-off (Error). Contact your designated service centre for instructions on removing the pacotizing beaker before sending the machine for repair (this is not covered by warranty).
- If a pacotizing blade is not attached, the shaft will be forced upwards into the machine housing, causing extensive damage.
- The shaft protrudes from the Pacojet housing (see Instruction Manual)
- Safely attempt to rotate the pacotizing blade on the shaft. If properly attached, it should meet with resistance.
- Ensure that every operator knows how to affix the pacotizing blade correctly.
| Beaker capacity | 1.2l (H: 135mm, Ø 130mm) |
| Maximum beaker fill volume | 0.8l = 10 portions |
| Ideal pacotizing® temperature | -18°C to -23°C |
| Over-pressure | 1 bar |
For Pacojet 1 and 2 Only.
Save this product for later
Have questions?
Share this product with your friends
Pacojet Spray guard Assembly Black
